How Wybot Transforms Pool Cleaning Experience

WYBOT robotic pool cleaners change pool care by moving the scrubbing, filtering, skimming, and scheduling away from manual work, and by letting you choose exactly how much automation you pay for. The WYBOT range at RoboticsSelect runs from a floor-only cleaner for flat-bottom pools to a flagship that maps the pool in 3D, docks, recharges, and empties itself. This guide walks the ladder from the A1 to the S3 so you can match a model to your pool size, debris type, and how much handling you want to keep.

What makes a WYBOT robotic pool cleaner different?

WYBOT is the pool robotics brand of WYBOTICS Co., Ltd., a manufacturer founded in 2005 that builds nothing but pool cleaners and skimmers. That narrow focus shows in the range: rather than one "best" cleaner, WYBOT offers a deliberate series of steps, and each step is an explainable upgrade rather than a vague premium label. That makes it one of the easiest brands to right-size to a pool and a budget.

It matters because pools do not get dirty the same way. A small above-ground pool with a flat floor may not need wall climbing or a camera. A large in-ground pool under trees may benefit from longer runtime, finer filtration, surface skimming, or targeted debris detection. The whole range is in the WYBOT collection, and our WYBOT model comparison lays every model out side by side with current prices.

The WYBOT range at a glance

Model	Cleaning coverage	Pool size and runtime
A1	Floor only, flat-bottom pools	Up to about 1,076 sq ft; up to 120 min
B1	Floor, walls, waterline, steps, slopes	Up to about 1,150 sq ft; up to 120 min
C1	Floor, walls, waterline, steps, slopes	Up to 1,615 sq ft; up to 150 min (Eco)
C2 and C2 Vision	Floor, walls, waterline	Up to 2,152 sq ft; up to 180 min (Eco)
S2	Floor, walls, steps, waterline	Up to 3,230 sq ft; up to 210 min
S2 Solar and Solar Vision	Floor, walls, waterline	Up to 3,229 sq ft; over 2.5 hr per cycle, self-recharges
S3	Floor (AI-targeted), 3D mapping	Docks, recharges, and self-empties

Entry-level models make routine cleaning simpler

The WYBOT A1 is the simplest cleaner in the range. It is built for above-ground and flat-bottom in-ground pools with a slope under 15 degrees, cleans the floor only, runs up to 120 minutes per charge, and recharges in about 2.5 hours. A dual-motor system delivers 2,280 GPH of suction, and dual-layer filtration pairs a 180 micron mesh with a textured foam layer. It pauses briefly at the wall to boost edge cleaning, then parks near the wall when the battery runs low. There is no wall climbing and no waterline cleaning; that is the trade-off for the price.

The B1 is the step up for owners who want a compact cleaner that still covers the whole pool. Rated for small pools up to about 1,150 square feet, it cleans floors, walls, waterline, steps, and slopes with a triple-motor drive, a quad-roller brush, and patented edge-to-edge side brushes that work into corners round-bodied cleaners miss. Five app modes and custom routes round it out, and it is light enough to lift with one hand.

C-series models balance coverage, filtration, and control

The C1 is the practical middle ground. It cleans floors, walls, waterline, steps, and slopes on tile, concrete, vinyl, and fiberglass, is rated for pools up to 1,615 square feet, and runs up to 150 minutes in Eco mode on 3,038 GPH of suction. Weekly scheduling, five cleaning modes, and self-parking at the wall come through the WYBOT app.

The C2 adds capability where mid-sized pools need it most. It is rated for pools up to 2,152 square feet, uses a brushless triple-motor system at 3,592 GPH, runs up to 180 minutes in Eco mode, and pairs a 180 micron filter box with a 10 micron ultra-fine filter in a 3 liter capacity. That fine layer suits pools that collect sand, pollen, or dead algae, though it clogs faster in heavily soiled water.

The C2 Vision builds on the C2 with an onboard AI camera. In Dirt Hunting mode it identifies where debris is concentrated on the floor and targets those areas first, and WYBOT rates AI Vision floor mode at up to 20 times faster for spot cleaning. It adds camera-based obstacle avoidance, an eighth cleaning mode, and Expert Mode path planning with six route patterns, on the same 2,152-square-foot platform. If your pool sits near trees and debris lands in predictable zones, targeted cleaning can be more useful than simply adding runtime.

S-series models focus on larger pools and less handling

The S2 is WYBOT's high-end cordless cleaner for large pools. It is rated for pools up to 3,230 square feet, runs up to 210 minutes per charge, recharges in about three hours, and cleans floors, walls including tile, steps, and waterlines with three brushless motors at 3,592 GPH. Filtration pairs a 180 micron filter with an ultra-fine cotton foam layer, and three modes are selectable on the unit itself, so the phone can stay in your pocket.

The S2 Solar changes the ownership experience. WYBOT describes it as the world's first underwater solar-powered robotic pool cleaner: instead of being lifted out to charge, it returns to an underwater solar charging dock when the battery drops below 20 percent, with a DC charger as backup. It runs over 2.5 hours per cycle, covers in-ground pools up to 3,229 square feet, and takes weekly schedules with custom times and modes for each day. Because the dock sits at the waterline, it is designed for in-ground pools.

The S2 Solar Vision adds the AI camera to that solar-dock platform, so weekly schedules can run in AI Vision mode for debris-focused floor cleaning. It is the choice for owners who want reduced handling and smarter targeting at the same time.

The S3 sits at the top of the range and closes the whole maintenance loop. It maps the pool in 3D on its first run, plans efficient paths every cycle, targets debris with AI Vision, and when it is low on battery or finished, returns to its dock, recharges, and empties debris into a 10 liter self-sanitising shore bin. WYBOT rates hands-on maintenance at about once a month. Check its product page for current stock before planning around it.

Surface skimming changes the whole routine

A floor cleaner handles what has already sunk. The WYBOT F1 works earlier in the process: it floats on the surface, powered by a 33 watt solar panel, and collects leaves, bugs, pollen, hair, and twigs before they settle. Dual brushless motors drive it along a V-shaped path, ultrasonic sensors steer it around obstacles, and its EdgeMaster behavior sends it to the wall where floating debris collects. A 7 liter basket with a 180 micron filter holds a large load, and an anti-backflow baffle keeps collected debris from escaping. Smart Mode runs for 24 hours on a 10-minute work, 10-minute rest cycle; Standard Mode runs continuously for 8 hours.

That is why WYBOT's Full Pool Solution bundles pair the F1 with the A1, B1, C1, C2, C2 Vision, S2, S2 Solar, or S2 Solar Vision at a saving over buying separately. One robot works below the surface while the F1 handles floating debris, which reduces how much reaches the floor in the first place. The bundles are grouped in the pool cleaner bundles collection.

What should you consider before choosing?

Start with the pool you actually have, not the feature list that sounds most advanced. A cleaner that is too basic misses walls and waterline buildup; a cleaner with features you do not need adds cost and handling.

• Pool size: the A1, B1, C1, C2, and S2 scale up across pool-size ratings from about 1,076 to 3,230 square feet.
• Pool shape and bottom: the A1 is for flat-bottom pools with a slope under 15 degrees; every other model climbs walls.
• Debris type: fine dust, pollen, and dead algae favor the 10 micron layer on the C2 and C2 Vision; leaves and floating debris make the F1 more useful.
• Handling preference: standard cordless models come out for charging; the S2 Solar and S2 Solar Vision recharge in the pool; the S3 also empties itself.
• App comfort: the S2 offers three modes on the unit, and every cordless model starts a default cycle from its power button.

Buying WYBOT from RoboticsSelect

RoboticsSelect is an authorized WYBOT dealer, so every unit is sourced through WYBOT's official channel and the full manufacturer warranty applies from delivery: 2 years on the C series, S series, and S3, and 1 year on the A1 and B1. A 30-day return window applies through our refund policy, shipping is free within the contiguous 48 U.S. states, and warranty claims go through our U.S.-based, product-trained team at support@roboticsselect.com or (412) 415-7375.

The takeaway

WYBOT transforms pool cleaning by letting you choose the right balance of simplicity, coverage, filtration, intelligence, and autonomy. The A1 and B1 make cordless cleaning approachable, the C series brings full-pool coverage and finer filtration, the S series serves larger pools and lower-touch ownership, and the F1 adds surface-level prevention. For most households the best choice is the one that matches the pool, not the most advanced model; our robotic pool cleaner buying guide helps you size that decision.