Skip to main content Skip to content

Deep Robotics

Comparison of Lite3 Models in Deep Robotics

7 min read
Deep Robotics Lite3 quadruped robot standing on rocks

The Deep Robotics Lite3 is a compact 12-degree-of-freedom quadruped sold in five configurations at RoboticsSelect: Basic, Basic AI, Venture, Pro, and LiDAR. All five share the same legs, motion host, and open development stack; what changes is the perception hardware, the onboard compute, and the software that is unlocked. This comparison lays out what each listing states so a lab, course, or developer can match the configuration to the first deliverable.

Key takeaways

  • Every Lite3 runs 2.5 m/s, climbs 40 degree slopes, clears 15 cm steps (18 cm in AI Motion Mode), and runs 1.5 to 2 hours on a hot-swappable battery.
  • Rated payload falls as sensors are added: 5 kg on Basic and Basic AI, 4.5 kg on Venture, 4 kg on Pro, and 2.5 kg on LiDAR; range falls from 5 km to about 2.7 km.
  • Basic AI unlocks AI Motion Mode and reinforcement-learning deployment; Venture adds dual Ethernet and multi-voltage power; Pro adds a Jetson Xavier NX and RealSense D435i; LiDAR adds a LiDAR module and Auto Mode autonomous navigation.
  • Electronics carry a 1-year warranty; joints, legs, and battery carry 6 months, reduced to 3 months once AI Motion Mode is unlocked.

What every Lite3 configuration shares

The common platform is a 610 x 370 mm body with 12 degrees of freedom (3 joints per leg) and 50 percent more joint torque than the previous generation. Each configuration reaches 2.5 m/s, climbs 40 degree slopes, and clears steps up to 15 cm, or up to 18 cm in AI Motion Mode, and all of them right themselves automatically after a fall. A hot-swappable, quick-release battery gives 1.5 to 2 hours of continuous operation, and overtemperature protection stops the robot and lies it down if the motors overheat.

Control runs on an RK3588 motion host at up to 1 kHz with a 9-axis IMU, on Ubuntu 20.04 with ROS1 (Noetic) and ROS2 (Foxy), with open SDK and API access in C++ and Python. Every configuration is rated for 0 to 40 degrees C in indoor and controlled outdoor use and is not weatherproof; Deep Robotics points buyers who need harsh industrial field deployment to its IP-rated X-series. Each box includes the robot with pre-installed firmware, one battery pack, an AC adapter, a wireless gamepad controller, and documentation with SDK access.

Lite3 specification comparison

Specification Lite3 Basic Lite3 Basic AI Lite3 Venture Lite3 Pro Lite3 LiDAR
Rated payload 5 kg 5 kg 4.5 kg 4 kg 2.5 kg
Weight 12 kg 12 kg 12.2 kg 12.9 kg 13.5 kg
Standing height 406 mm 406 mm 445 mm 450 mm 496 mm with LiDAR
Max range 5 km 5 km 4 km 3.4 km 2.7 km
Perception host None None Optional Jetson Xavier NX add-on Jetson Xavier NX Jetson Xavier NX
Sensors Baseline Baseline Baseline; dual Ethernet and 24/12/5 V power RealSense D435i, wide-angle camera, dual ultrasonic radars LiDAR module plus the Pro sensor set
Perception features Obstacle stop, visual following Obstacle stop, visual following Obstacle stop, visual following Adds forward obstacle avoidance Adds Auto Mode autonomous navigation
AI Motion Mode Not unlocked Unlocked Not stated as unlocked Not stated as unlocked Not stated as unlocked

Max speed (2.5 m/s), degrees of freedom (12), endurance (1.5 to 2 hours), and operating temperature are identical across the line, so the choice comes down to payload, perception, and software. Each payload and range figure above is taken from that model's own listing. The Deep Robotics comparison page keeps the same table current as listings change.

Deep Robotics Lite3 open modular architecture for developmentDeep Robotics Lite3 joint torque and climbing capability
The Lite3 platform is open for development (left) and shares its joint and locomotion hardware across the Basic, Venture, Pro, and LiDAR versions (right).

Which Lite3 model fits your project?

Lite3 Basic: the entry point for coursework and gait work

The Lite3 Basic is the entry configuration for robotics education, academic research, and early-stage development. It has the full locomotion package and open SDK, baseline perception (front and rear obstacle stop and visual following), and M5 threaded mounting points for adding your own cameras or LiDAR later. At 12 kg with a 5 kg payload and 5 km range, it is the lightest and longest-ranging Lite3, and it suits classroom labs, gait testing, and introductory middleware work.

Lite3 Basic AI: reinforcement learning on the same hardware

The Lite3 Basic AI shares the Basic's hardware and unlocks AI Motion Mode, which enables learned locomotion policies and steps up to 18 cm. Deep Robotics supports deployment through its Lite3_rl_deploy GitHub repository, with policies trained in PyTorch or TensorFlow on a host machine before deployment. It is the choice for sim-to-real locomotion research, policy transfer, and domain randomization. Note that unlocking AI Motion Mode reduces the joints, legs, and battery warranty from 6 months to 3 months.

Lite3 Venture: interfaces for your own sensors

The Lite3 Venture is the integration-oriented middle tier. It adds dual Ethernet and an external power supply with 24 V, 12 V, and 5 V outputs for hosting your own sensors and payload computing, and an NVIDIA Jetson Xavier NX perception host is available as an add-on through those interfaces. The body is slightly taller at 445 mm and the payload is 4.5 kg with 4 km of range. Choose it when the plan is to start with the motion platform and build a custom perception stack over time.

Lite3 Pro: onboard vision out of the box

The Lite3 Pro ships with the perception stack installed: an NVIDIA Jetson Xavier NX (6-core Carmel CPU, 384-core Volta GPU with 48 Tensor cores, 8 GB), an Intel RealSense D435i depth camera, a wide-angle camera, and dual ultrasonic radars. The Jetson runs real-time Visual SLAM from the depth stream, CUDA-accelerated PyTorch and TensorFlow, and object detection with YOLOv8 and other models. It adds forward obstacle avoidance and Flat, RUG, Grip, and H-Step gaits, at 12.9 kg with a 4 kg payload and about 3.4 km of range.

Lite3 LiDAR: mapping and autonomous navigation

The Lite3 LiDAR takes the Pro's sensor set and adds a Livox or Leishen LiDAR module for 3D mapping, with Faster-LIO SLAM and the Nav2 navigation stack pre-configured. Its Auto Mode for autonomous navigation is exclusive to this configuration. Because the sensor package adds weight, it is the heaviest Lite3 at 13.5 kg with the lowest rated payload (2.5 kg) and range (about 2.7 km). Deep Robotics calls it the most capable perception configuration in the line and aims it at LiDAR SLAM, Nav2 path planning, and perception research in GPS-denied indoor environments.

How do you decide?

Start from the first deliverable. A course on motion control or a first legged-robotics lab needs the Basic. A reinforcement-learning group that will train in simulation and deploy on hardware needs the Basic AI's unlocked mode and repository support. A team that already owns sensors and compute, or wants to choose them, is served by the Venture's interfaces. A vision group that wants to run detection and Visual SLAM on day one needs the Pro, and a navigation group that needs 3D maps and autonomous route following needs the LiDAR. Moving up the line buys perception, not speed or endurance, and costs payload.

The Deep Robotics Lite3 Controller sold alongside the robots is an accessory, and the Lynx M20 Pro is a separate wheel-legged platform; neither is a sixth Lite3 configuration. Both appear in the Deep Robotics collection next to the five Lite3 listings.

Before you buy

Weigh the payload you intend to mount against the rated figure for the configuration, since the LiDAR edition leaves 2.5 kg and the Basic leaves 5 kg. Every Lite3 is rated for 0 to 40 degrees C indoors or in controlled outdoor conditions and is not weatherproof, so plan test areas accordingly. If you plan to unlock AI Motion Mode, budget for the shorter 3-month coverage on joints, legs, and battery.

Warranty, shipping, and support

Every Lite3 configuration carries the same limited warranty: electronics for 1 year from the date of delivery, and joints, legs, and battery for 6 months, reduced to 3 months once AI Motion Mode is unlocked. The shell and accessories, damage from misuse, negligence, or unauthorized modification, normal wear on consumables, use outside recommended operating conditions, and unauthorized repair or disassembly are not covered. Claims require valid proof of purchase, and regional terms may vary.

RoboticsSelect is an authorized Deep Robotics dealer, so warranty and repair requests go through our support team, which coordinates with Deep Robotics. Shipping is free to the contiguous 48 U.S. states; we do not ship to PO boxes, Alaska, Hawaii, Puerto Rico, or outside the U.S. Unopened, unused units may be returned within 30 days under the refund policy. Our U.S.-based, product-trained team is available at support@roboticsselect.com or (412) 415-7375.

The takeaway

The five Lite3 configurations are one robot at five levels of perception. Buy the Basic to learn legged locomotion, the Basic AI to deploy learned policies, the Venture to integrate your own sensors, the Pro for onboard vision, and the LiDAR for mapping and autonomous navigation. All five are listed with live pricing in the quadruped robots collection at RoboticsSelect.

Products in this article

FAQ

What is the difference between the Lite3 Basic and the Lite3 Basic AI?

They share the same hardware, a 12 kg body with an RK3588 motion host and 5 kg payload. The Basic AI unlocks AI Motion Mode for learned locomotion and 18 cm steps, and supports reinforcement-learning deployment through the Lite3_rl_deploy repository with PyTorch and TensorFlow.

Which Lite3 models include a perception computer?

The Lite3 Pro and Lite3 LiDAR ship with an NVIDIA Jetson Xavier NX installed. The Venture can add one through its onboard interfaces, and the Basic and Basic AI have a motion host only.

Why does the Lite3 LiDAR carry less payload?

The LiDAR module and sensor package add weight, so the LiDAR edition is 13.5 kg with a 2.5 kg rated payload and about 2.7 km of range, compared with 12 kg, 5 kg, and 5 km on the Basic.

Can a Lite3 be used outdoors?

Every Lite3 configuration is rated for 0 to 40 degrees Celsius in indoor and controlled outdoor use and is not weatherproof. Deep Robotics points buyers who need harsh field deployment to its IP-rated X-series.

Which Lite3 navigates autonomously?

Only the Lite3 LiDAR has Auto Mode for autonomous navigation, with Faster-LIO SLAM and the Nav2 stack pre-configured. The Pro adds forward obstacle avoidance and Visual SLAM but not Auto Mode.

What warranty applies to the Lite3 line?

Electronics are covered for 1 year from delivery; joints, legs, and battery for 6 months, reduced to 3 months once AI Motion Mode is unlocked. RoboticsSelect is an authorized Deep Robotics dealer, so warranty support is handled through our support team.