Skip to main content Skip to content

Elephant Robotics

Comparison of Elephant Robotics myArm C650 vs myArm M750

6 min read
Operator guiding an Elephant Robotics myArm C650 while a second arm follows

The Elephant Robotics myArm C650 and myArm M750 look alike but do different jobs: the C650 is a hand-operated controller that captures motion and drives another robot, and the M750 is the execution arm that carries a gripper and performs the movement. This comparison explains what each listing says the two devices do, where their specifications differ, how they pair for teleoperation and data collection, and which one (or both) a lab or classroom should order.

Key takeaways

  • The C650 ("C" for Controller) is a 6-DOF motion information collection device with a fingertip controller and two smart buttons; it outputs endpoint coordinates or joint angles at 50 Hz and is not a payload-bearing arm.
  • The M750 ("M" for Master) is a 6-DOF execution arm with a 750 mm reach, a 500 g rated payload (1 kg maximum), and an included 1-DOF parallel gripper.
  • Both run in Python and ROS, and paired together they support end-to-end data training and reproduction similar to the ALOHA approach, with the C650 as leader and the M750 as follower.
  • Each carries the Elephant Robotics After-Sales Warranty Policy: 365 days on the mechanical structure, power supply system, and control system.

Which myArm model fits your project?

Choose the myArm C650 when the deliverable is a recorded demonstration or a live control signal: it is the device a person moves by hand. Choose the myArm M750 when the deliverable is a physical action: reaching, grasping, and moving an object. If the goal is to demonstrate a task manually and have a robot reproduce it, the right purchase is the pair, which Elephant Robotics describes as its myArm teleoperation system.

Criterion myArm C650 myArm M750
Role Teleoperation controller and data collector Execution arm for motion control and manipulation
Design 6+1 axis; expandable to a 7-DOF data collector 6+1 axis: six joints plus a 1-DOF end effector
End of arm Fingertip controller plus 2 smart buttons 1-DOF parallel gripper (included)
Reach Not stated on the listing 750 mm
Payload Not a payload-bearing arm 500 g rated; 1 kg maximum
Output Endpoint coordinates or joint angles at 50 Hz Real-time motion data (position, speed) with anomaly detection
Controls or pairs with myArm M750, myCobot Pro 630, Mercury X1 myArm C650 controller for teleoperation
Programming Python and ROS Python and ROS
In the box Controller with fingertip input installed, connection cable, quick-start guide Arm, 1-DOF parallel gripper, power adapter and cables, quick-start guide

The reach figures look comparable but are not the same kind of number. The M750's 750 mm reach describes a working envelope with a 500 g object in the gripper. The C650 has no manipulation payload at all; it is moved by the operator, so its value is the motion data it produces, not what it can lift. The Elephant Robotics arm comparison sets both beside the rest of the lineup.

myArm C650: the leader device

Elephant Robotics describes the C650 as a universal 6-DOF robot motion information collection device. It is equipped with a fingertip controller and two smart buttons at the end, and it outputs endpoint coordinates or joint angles at 50 Hz while sensing real-time motion data (position and speed) with anomaly detection. Its modular design can be expanded into a 7-DOF data collector, and as a universal control hub it drives the myArm M750 execution arm, the myCobot Pro 630, and the Mercury X1 dual-arm robot, among others.

The listed applications are robotics education, scientific research, and industrial data collection. As a teaching tool it provides remote control of conventional, complex, and heavy-duty robots and is used to validate robot kinematics algorithms hands-on; in labs it captures precise motion data from a 6-axis structure for analysis and replay. Setup is short: mount the controller to a stable surface, connect it to a computer, install the Python or ROS environment from Elephant Robotics' documentation and GitHub resources, pair the robot to be controlled, and move the controller by hand to drive the robot or record data.

myArm M750: the follower arm

The M750 is a 6-DOF intelligent robotic arm for education, research, and commercial demonstration. Its 6+1 axis design, six joints plus a 1-DOF end effector, mimics the flexibility of a human arm for multi-angle, multi-directional work. With a 750 mm reach, a 500 g rated payload, and up to 1 kg maximum, it handles common objects, and the listing says that with its included parallel gripper it can fold clothes, sort books, brew coffee, and complete other manipulation tasks. Onboard sensors track position and speed and identify anomalies to support safe operation.

In classrooms it gives hands-on experience with kinematics, motion control, and programming in Python and ROS; in research it serves as a standardized arm for verifying motion-control algorithms and composite-scene applications. Setup covers mounting the arm, connecting power and data, installing the Python or ROS environment, attaching the gripper and running a simple motion test within the arm's limits, and, optionally, connecting a C650 for teleoperation.

Elephant Robotics myArm M750 working as the controlled armElephant Robotics myArm C650 on a desk by a window
The myArm M750 (left) executes motion as the controlled arm; the myArm C650 (right) is the lighter controller arm.

How do the C650 and M750 work together?

Both listings describe the same arrangement: the C650 is the leader device that records demonstrations, and the M750 is the follower arm that reproduces them. Because the myArm series supports end-to-end data training and reproduction similar to the ALOHA robot, the pair is used for collecting training data, validating algorithms locally, and exploring real-time remote-control scenarios. The M750 listing adds that the pairing is useful for verifying motion-control algorithms and for localized algorithm deployment.

For a data-collection project, plan the dataset before the demonstration: decide whether joint angles, endpoint coordinates, timing, or gripper events are the record, and confirm how those 50 Hz outputs will be stored and aligned. For a teleoperation project, run an end-to-end test that covers starting, stopping, and behavior near the arm's reach and payload limits before building a lesson or experiment on it.

A wearable alternative for the leader role

Elephant Robotics also sells the myController S570, a 1.5 kg wearable dual-arm exoskeleton controller with 12 degrees of freedom (six per arm), 570 mm reach per arm, 4096-resolution magnetic encoders, and data sampling at up to 100 Hz. Its compatibility list includes the myArm M750, so a lab that wants two-arm, whole-body demonstrations can pair the S570 with an M750 instead of, or alongside, the C650. The C650 remains the single-arm, bench-mounted option.

Before you buy

Order by deliverable. A recorded demonstration needs the C650; a moved object needs the M750; a demonstration that a robot then reproduces needs both. Keep test objects within the M750's 500 g rated payload, and mount both devices on a stable surface as the listings direct. If the project will later drive a myCobot Pro 630 or Mercury X1, the C650 is the controller that spans those platforms.

Warranty, shipping, and support

Both devices are covered by the Elephant Robotics After-Sales Warranty Policy, which covers defects in material and workmanship under normal use from the date of receipt: 365 days on the mechanical structure (joint connectors, shells, bearings, end flange, main body), 365 days on the power supply system (DC power supplies, cables, inverters), and 365 days on the control system (control boards and electronics). Damage from misuse, accident, or operation outside the documented limits, unauthorized repair, disassembly, or modification, and normal wear on consumable parts are excluded, and service requires a valid proof of purchase or order number.

RoboticsSelect is an authorized Elephant Robotics dealer, so warranty and repair requests go through our support team, which coordinates with Elephant Robotics. Shipping is free to the contiguous 48 U.S. states; we do not ship to PO boxes, Alaska, Hawaii, Puerto Rico, or outside the U.S. Unopened, unused units may be returned within 30 days under the refund policy. Our U.S.-based, product-trained team is available at support@roboticsselect.com or (412) 415-7375.

The takeaway

The myArm C650 and myArm M750 are two halves of one teleoperation system rather than competing arms. The C650 captures what a person does at 50 Hz; the M750 carries 500 g through a 750 mm reach and does it. Buy the one that matches your deliverable, or the pair for leader-follower data collection. Both are listed with the other desktop robotic arms and kits at RoboticsSelect.

Products in this article

FAQ

Is the myArm C650 a robotic arm?

No, it is a teleoperation control device and data collector. Per the listing it is not a payload-bearing arm; you move it by hand and it outputs endpoint coordinates or joint angles at 50 Hz to drive another robot or record motion.

How much can the myArm M750 lift?

The M750 has a 500 g rated payload and a 1 kg maximum, with a 750 mm reach and an included 1-DOF parallel gripper.

Do I need both the C650 and the M750?

Only if you want a robot to reproduce a human demonstration. The C650 is the leader device that records motion and the M750 is the follower arm that executes it; the pair supports end-to-end data training and reproduction similar to the ALOHA approach. Either can be used alone for its own role.

What robots can the myArm C650 control?

The listing names the myArm M750, the myCobot Pro 630, and the Mercury X1 dual-arm robot, among others.

What software do the myArm devices use?

Both the C650 and the M750 are programmed in Python and ROS, with documentation on Elephant Robotics' GitBook and GitHub resources.

What warranty applies?

The Elephant Robotics After-Sales Warranty Policy covers the mechanical structure, power supply system, and control system for 365 days each from the date of receipt. RoboticsSelect is an authorized Elephant Robotics dealer, so warranty support is handled through our support team.