PONGBOT
Mastering Table Tennis with PONGBOT Halo S Pro
The PONGBOT Halo S Pro is PONGBOT's floor-standing table tennis robot: it serves from a wheeled stand with up to 100 revolutions per second of 360-degree spin, runs 702+ built-in drills, and feeds a 250-ball hopper through an integrated recovery net. This guide covers its specifications, what the floor stand changes, how to set it up, and how to turn its settings into focused practice.
Key takeaways
- Spin reaches 100 r/s in 23 levels with 360-degree control and a 0.66-second spin switch; ball speed runs 2 to 15 m/s and frequency 30 to 90 balls per minute.
- The wheeled floor stand serves from the center of the baseline or from the middle of the left or right side, with automatic full-table oscillation.
- 702+ built-in drills, the largest library in the PONGBOT line, run from the included 5-inch E-Pad S touchscreen alongside custom programs and trajectory previews.
- The 250-ball hopper feeds through a recovery net, and the robot weighs 11 kg (24.3 lb) net.
- PONGBOT covers the main unit for 1 year and the core motors for 3 years.
What does the PONGBOT Halo S Pro offer?
The Halo S Pro puts PONGBOT's top serving performance on a floor stand. Two squeeze wheels deliver any spin in any direction, and automatic, continuous oscillation places balls across the full table without manual adjustment. Control comes from the included E-Pad S touchscreen or the PONGBOT app, and the robot runs from the included AC adapter.
| Specification | Halo S Pro |
|---|---|
| Ball speed | 2 to 15 m/s, 21 levels |
| Frequency | 30 to 90 balls per minute, 11 levels |
| Max spin | Up to 100 r/s, 23 levels; 360-degree, customizable |
| Spin switch | 0.66 s |
| Left-right angle | 44 degrees (-22 to +22) at position 1 |
| Up-down angle | 60 degrees (-20 to +40) |
| Side spin | 0 to 135 degrees, automatic |
| Positions | Center of the baseline, or the middle of the left or right side |
| Ball capacity | 250 balls (standard 40+), integrated recovery net |
| Controller | E-Pad S, 5.0-inch touchscreen, 2,100 mAh battery, USB-C charging |
| App | PONGBOT app for iOS and Android over Bluetooth; OTA updates |
| Preset drills | 702+ |
| Power | DC 24 V; AC 100 to 240 V adapter included |
| Dimensions | 320 x 330 x 1,083 mm (12.6 x 13.0 x 42.6 in) |
| Weight | 11 kg net (24.3 lb); 19 kg gross |
Treat speed, spin, and frequency as separate controls rather than settings to push to the maximum together. Most useful drills combine a moderate pace with one variable you want to train, such as spin type or placement.
What does the floor stand change?
A clamp-on robot such as the Omni S Pro mounts at the end of the table in a fixed position. Because the Halo S Pro stands on the floor, it can serve from the center of the baseline or from the middle of the left or right side, which changes the angles you train against and leaves the table itself clear of clamps. Automatic, continuous oscillation still covers the full table without manual adjustment.
How it compares with the rest of the PONGBOT line
The PONGBOT Omni S Pro offers the same serving performance (100 r/s spin, 2 to 15 m/s, 250 balls with a recovery net) as a clamp-on unit with 522+ drills, and it shares the Halo's app and drill library. The PONGBOT Nova S Pro is the portable model: 4 kg, spin up to 60 r/s with nine spin types, and a 150-ball hopper. Our PONGBOT model comparison sets all five PONGBOT robots side by side.

How do you set up the Halo S Pro?
Setup takes four steps, per PONGBOT. Fit the robot to its floor stand with the supplied screws and screwdriver, attach the band, and raise the ball recovery net. Roll the stand to the baseline center or a side position, connect the AC adapter, and switch on.
Fill the hopper with up to 250 balls, charge the E-Pad S over USB-C, and pair it, plus the app if you want phone control. Then choose one of the 702+ presets or a custom program and start. The box contains the Halo S Pro robot, the E-Pad S controller, the ball recovery net, the band, a USB-C cord, screws and a screwdriver, and the power adapter.
For the first session, pick one simple drill at a moderate pace and watch where the balls land before adding oscillation or spin changes. The trajectory preview on the E-Pad S shows the planned ball path, but a few test balls at the table confirm it. Keep a short note of the position and drill you used so the next session starts from the same baseline.
How do you turn the settings into focused practice?
The Halo S Pro's drill library covers footwork, serve-receive from the sides, and spin variation at match pace. The suggestions below are practice structures rather than named PONGBOT presets; adapt them to your level or your coach's plan, and change one variable at a time.
Groove one stroke
Set a predictable ball to one spot at a manageable pace and play a set toward a broad target. Pick one technical cue for the whole set, such as a balanced finish. If misses keep going long or into the net, repeat the set with the same cue before touching the settings.
Connect two placements with footwork
Build or choose a two-point pattern, such as alternating backhand and forehand balls, at a comfortable width. Make the task arrive, play, and recover rather than simply reaching every ball. If you start lunging or crossing your feet, narrow the pattern or lower the frequency before widening it again.
Read spin deliberately
Use the 360-degree spin controls to save two clearly labeled routines that differ only in spin. Play one, then the other, at the same pace and placement, and note how your racket angle has to change. Once single-spin sets feel controlled, build a custom program that mixes the two; the listed 0.66-second spin switch is what makes quick spin changes possible.
Practice receive from the side positions
Roll the stand to the left or right side position to change the incoming angle. Start with the same simple ball you used from the baseline, then compare how your return changes. This is where a floor-standing robot differs most from a clamp-on unit.
| Time | Suggested activity | What to watch |
|---|---|---|
| 5 minutes | Gentle, predictable balls to one spot | Clean contact |
| 8 minutes | One-stroke set with one cue | Where misses land |
| 7 minutes | Two-point footwork pattern | Recovery between balls |
| 5 minutes | Spin comparison or side-position receive | Racket angle changes |
| 5 minutes | Repeat the opening set and record notes | Change from the start |

Before you buy
Plan the room around the positions you will use most. The robot stands 1,083 mm tall on a 320 x 330 mm footprint, and you need space beside the table if you plan to use the side positions, plus a power outlet within reach of the adapter. The shipping carton measures 630 x 430 x 1,090 mm at 19 kg, so check the route from the door to the playing area.
Who is the Halo S Pro best suited for?
PONGBOT positions the Halo S Pro for clubs, academies, and dedicated home rooms where a robot needs to serve from different positions for different players and the table should stay free of clamps. Its 702+ drills and automatic placement suit players with a regular training plan. A player who wants a robot that travels to the club or sets up on any table will be better served by the Nova S Pro, and a fixed clamp-on setup points to the Omni S Pro. The table tennis robot buying guide covers how to choose between the formats.
Warranty, shipping, and support
PONGBOT (Shanghai Future Mind Co., Ltd.) covers the Halo S Pro main unit for 1 year, the core motors for 3 years, and the ball squeezing wheels and accessories (adapter, E-Pad S, net, cables, clips) for 1 year. Claims need proof of purchase, the serial number, and a short video of the fault, and PONGBOT pays one-way shipping on covered repairs through its U.S. repair center in California. Liquid damage, drops, wrong supply voltage, and unauthorized repairs are excluded.
RoboticsSelect is an authorized PONGBOT dealer, and our U.S.-based, product-trained team at support@roboticsselect.com or (412) 415-7375 is your first line of support and coordinates warranty claims with PONGBOT. Shipping is free to the contiguous 48 U.S. states; we cannot ship to PO boxes, Alaska, Hawaii, Puerto Rico, or addresses outside the U.S. The 30-day return window applies to unopened, unused units under the refund policy.
The takeaway
The Halo S Pro suits players and clubs who want PONGBOT's strongest serving performance without clamping anything to the table: 100 r/s spin, three serving positions, 702+ drills, and a 250-ball hopper with a recovery net. Go in with a short plan of two or three drills you will repeat, and the floor stand and drill library give each session a clear purpose. Compare it with the other models in the table tennis robots collection.
Products in this article
FAQ
Does the PONGBOT Halo S Pro clamp to the table?
The Halo S Pro stands on its own wheeled floor stand, so it can serve from the center of the baseline or from the middle of the left or right side. The Omni S Pro is PONGBOT's clamp-on model with the same serving performance.
How many balls does the Halo S Pro hold?
The hopper holds 250 standard 40+ balls and is fed by an integrated ball recovery net that returns your shots to the machine.
Can I control the Halo S Pro from my phone?
Yes. The included E-Pad S 5-inch touchscreen runs drills, settings, and trajectory previews, and the PONGBOT app for iOS and Android connects over Bluetooth, syncs drills, and delivers over-the-air updates.
How is the Halo S Pro different from the Omni S Pro?
Both deliver spin up to 100 r/s, 2 to 15 m/s ball speed, 30 to 90 balls per minute, and a 250-ball hopper with a recovery net. The Halo S Pro stands on the floor with three serving positions and 702+ drills; the Omni S Pro clamps to the end of the table and carries 522+ drills.
What power does the Halo S Pro need?
It runs from the included AC adapter (100 to 240 V input) at a rated DC 24 V. The E-Pad S controller has its own 2,100 mAh battery and charges over USB-C.
What warranty does the Halo S Pro carry?
PONGBOT covers the main unit for 1 year, the core motors for 3 years, and the squeezing wheels and accessories for 1 year. RoboticsSelect support coordinates claims, which need proof of purchase, the serial number, and a short video of the fault.