Robotic Kits
WLKATA Mirobot Fruit Picking Cell: AI Vision Touchscreen Training System (Features, Uses, Buying Guide)
The WLKATA Mirobot Fruit Picking Cell is a turnkey training workstation that simulates an automated fruit-picking and sorting line on a benchtop. It combines a WLKATA Mirobot Professional Kit, a VisionSoftGrip AI vision end tool with a three-finger soft gripper, and a touchscreen that starts the whole workflow with one tap. This guide covers what is in the cell, how the picking workflow runs, what it teaches, how it compares with WLKATA's other Mirobot cells, and what to confirm before a purchase order.
Key takeaways
- Built around a 6+1 axis WLKATA Mirobot with 315 mm reach, 0.2 mm repeatability, and a 250 g standard payload, mounted on a 580 x 400 x 100 mm Production Cell Smart Base.
- The VisionSoftGrip pairs an AI vision camera with a three-finger soft gripper; the vision system supports object, color, shape, and QR code recognition plus vision-based robot control.
- A touchscreen module gives one-click start, stop, and workflow management; control runs through an Arduino MEGA 2560 based main control box.
- The fruit trees kit includes a tree stand, calibration stand, apple, orange, and pear models, and three sorting baskets; a color sensor and LED infographic panel complete the station.
- WLKATA covers the Mirobot arm with a 1-year warranty; RoboticsSelect is an authorized WLKATA dealer and handles warranty support.
What is the WLKATA Mirobot Fruit Picking Cell?
The WLKATA Fruit Picking Cell is one of WLKATA's Mirobot-based training cells: a complete station that models an industrial task at desktop scale so students can run it, then take it apart conceptually. In this case the task is vision-guided picking and sorting. The robot identifies model fruit by color and shape, picks it with a soft gripper, and sorts it into baskets. WLKATA designs it for vocational and technical training and uses it to introduce smart-farming and agricultural automation concepts.
The model fruit and tree stand are a teaching scene, not evidence of outdoor harvesting capability. The value for a program is that recognition, decision, and motion are all present in one supervised workflow, so an instructor can run a demonstration quickly and then have students dig into the AI vision, control, and sorting logic behind it.
What is included, and what does each part do?
| Component | Role in the cell |
|---|---|
| WLKATA Mirobot Professional Kit | 6+1 axis arm, 315 mm reach, 0.2 mm repeatability, 250 g standard payload (400 g near the desktop) |
| VisionSoftGrip end tool | AI vision camera plus three-finger soft gripper for vision-guided, gentle picking |
| Production Cell Smart Base, small | 580 x 400 x 100 mm base that carries the arm and control box |
| Main control box | Arduino MEGA 2560 based, mounted on the smart base |
| Touchscreen module | One-click start, stop, and management of the automated workflow |
| Color sensor module | Color detection within the sorting scene |
| Fruit trees kit | Fruit tree stand, calibration stand, apple, orange, and pear models, three baskets |
| LED lighted infographic panel with stand | Explains the process to observers during demonstrations |
The arm specifications come from the Mirobot Professional Kit listing, which is the kit the cell is built around. On its own, the Professional Kit also ships a wireless Bluetooth teach pendant, a servo gripper, pen holder, pneumatic end-effector set, and university-level textbooks, and supports Blockly, Python, G-code, ROS, ROS2, MATLAB, and CoppeliaSim. The Fruit Picking Cell listing itemizes the arm, the VisionSoftGrip, the base, the sensor, the fruit trees kit, the control box, the touchscreen, and the panel; confirm with RoboticsSelect which Professional Kit accessories ship inside the cell configuration before ordering.

How does the picking workflow run?
The listing's setup sequence doubles as a description of the workflow. After unboxing and inspecting the arm, VisionSoftGrip, smart base, and fruit trees kit, the base is assembled and the Mirobot mounted on it. The VisionSoftGrip is fitted to the arm, the fruit tree and calibration stand are assembled, the baskets are placed, and the Arduino MEGA 2560 control box and touchscreen module are connected. The final step is calibrating the vision system and starting the fruit-picking workflow from the touchscreen.
In operation, the AI vision camera on the VisionSoftGrip recognizes each fruit model by color and shape, the control box decides where it belongs, and the arm picks it with the three-finger soft gripper and places it in the matching basket. The vision capabilities listed go beyond this one routine: object recognition, color detection, shape recognition, vision-based robot control, and QR code recognition are all supported, which is what lets students extend the exercise once the stock demonstration is understood.
What does the cell teach?
WLKATA aims the cell at vocational training centers and technical programs teaching AI-driven robotics and smart-farming concepts. The clearest lesson is the division of labor inside an automated cell: perception (the camera), decision (the controller), and execution (the arm and gripper). A useful classroom exercise asks learners to predict which basket a given fruit model will land in, run the routine from the touchscreen, and explain any mismatch, separating recognition errors from gripping or motion errors.
Because the cell is built on a Mirobot Professional Kit, the arm itself supports the same programming paths as the standalone kit: Blockly visual coding and teach-and-play for beginners, Python and G-code for intermediate work, and ROS, MATLAB, and CoppeliaSim for advanced courses. That lets a program start with the one-click demonstration and progress to writing new sorting logic or recalibrating the vision system. The robotic kit buying guide explains how WLKATA's kits and cells fit different course levels.
How does it compare with WLKATA's other Mirobot cells?
RoboticsSelect carries three touchscreen-driven Mirobot cells. The Fruit Picking Cell is the single-arm, vision-and-soft-gripper station. The AI Automatic Sorting Cell pairs two Mirobot arms with a conveyor belt and the OpenMV-based WLKATA AI Vision Set for conveyor sorting, and the Automobile Assembly Cell uses the same two-arm, conveyor, and vision platform to model a car production line. Choose the Fruit Picking Cell for a compact, single-arm introduction to vision-guided picking and agricultural automation; choose the two-arm cells when conveyor flow and multi-arm coordination are the lesson.
Setup, space, and what to plan for
The small Production Cell Smart Base measures 580 x 400 x 100 mm, and the Mirobot reaches 315 mm from its 160 mm base, so the station needs a stable bench with clear space around the arm's reach plus room for the fruit tree stand, baskets, and the infographic panel on its stand. Plan a supervised operating area where observers stay outside the moving workspace, and storage for the fruit models and calibration stand between sessions.
Before you buy
Match the cell to specific learning objectives: it suits courses on vision-guided picking, sorting logic, and smart-farming concepts, and it may be more station than a basic motion-programming class needs, where a standalone Mirobot kit covers the ground. Confirm the computer and software requirements for programming beyond the touchscreen demonstration, request an itemized quote, and ask RoboticsSelect to confirm which Professional Kit accessories and curriculum materials ship with the cell. Educational and institutional buyers can request a formal quote and purchase order process through the contact page.
Warranty, shipping, and support
The Fruit Picking Cell is covered by the WLKATA Product Warranty Policy, provided by Wristline Inc. (WLKATA) or its authorized agents. The WLKATA Mirobot robotic arm carries a 1-year warranty, spare parts carry a 3-month, 6-month, or 1-year warranty depending on the part, and consumables are not covered. Damage from misuse, accident, operation outside the documented limits, or unauthorized repair or modification is excluded, and warranty service requires a valid proof of purchase. RoboticsSelect is an authorized WLKATA dealer, so warranty support is handled through us and the order confirmation serves as proof of purchase.
Shipping is free to the contiguous 48 U.S. states; RoboticsSelect does not ship to PO boxes, Alaska, Hawaii, Puerto Rico, or outside the U.S. Unopened, unused units can be returned within 30 days per the refund policy. Support runs through our U.S.-based product-trained team at support@roboticsselect.com or (412) 415-7375, and technical, warranty, and repair requests are coordinated with WLKATA. WLKATA also maintains a developer community on GitHub for source code and examples.
The takeaway
The WLKATA Mirobot Fruit Picking Cell packages a true 6+1 axis arm, an AI vision soft gripper, and a touchscreen into one benchtop station that demonstrates vision-guided picking and sorting from the first tap and then opens up for programming. For vocational and technical programs that want an agricultural automation scene rather than a bare arm, it is the compact option among the WLKATA training cells and production lines at RoboticsSelect.
Products in this article
WLKATA Fruit Picking Cell (Mirobot) | AI Vision Touch Screen |
$2,800.00
View product
WLKATA Mirobot Professional Kit | 6-Axis Robotic Arm Ros & Matlab Simulation Teaching
$1,790.00
View product
WLKATA AI Automatic Sorting Cell (Mirobot) | Touch Screen
$6,500.00
View product
WLKATA Automobile Assembly Cell (Mirobot) | Car Manufacturing Training Solution | Touch Screen
$7,200.00
View product
FAQ
What robot arm is inside the WLKATA Fruit Picking Cell?
A WLKATA Mirobot Professional Kit: a 6+1 axis desktop arm with 315 mm reach, 0.2 mm repeatability, and a 250 g standard payload, controlled by an Arduino MEGA 2560 based control box mounted on the smart base.
What can the cell's AI vision system recognize?
The VisionSoftGrip's AI vision supports object recognition, color detection, shape recognition, vision-based robot control, and QR code recognition. In the stock workflow it identifies apple, orange, and pear models by color and shape and sorts them into three baskets.
Does the Fruit Picking Cell require programming to run?
The touchscreen module starts, stops, and manages the automated workflow with one tap. Programming is optional and comes through the Mirobot's software stack, which supports Blockly, Python, G-code, ROS, MATLAB, and CoppeliaSim.
Who is the Fruit Picking Cell designed for?
Vocational training centers and technical programs teaching AI-driven robotics and smart-farming concepts. It gives students a hands-on example of vision-guided picking and sorting with a soft gripper.
How is it different from the WLKATA AI Automatic Sorting Cell?
The Fruit Picking Cell is a single-arm station with the VisionSoftGrip and a fruit trees kit. The AI Automatic Sorting Cell uses two Mirobot arms, a conveyor belt, and the OpenMV-based WLKATA AI Vision Set for conveyor sorting. See the WLKATA comparison page.
What warranty applies to the Fruit Picking Cell?
The WLKATA Product Warranty Policy from Wristline Inc.: a 1-year warranty on the Mirobot arm, 3-month to 1-year coverage on spare parts depending on the part, and no coverage for consumables. RoboticsSelect is an authorized WLKATA dealer and handles warranty support.