Roborock Qrevo CurvX Robot Vacuum with Multifunctional Dock 3.0 Thermo+

Roborock lists four upgrades: suction rises from 18,500 Pa to 22,000 Pa, mop pressure rises to 12 N, mop washing goes from 75 C to 80 C (176 F) on the Multifunctional Dock 3.0 Thermo+, and the fixed LiDAR turret becomes a retractable RetractSense module. That retracting sensor is what brings the body down to 3.14 inches (7.98 cm), so it fits under sofas, beds, and consoles the Curv cannot. The 6,400 mAh battery and the AdaptiLift chassis carry over.

Yes. The AdaptiLift chassis lifts the whole body or individual sections to cross thresholds up to 1.57 in (4 cm), including double-layer transitions, and the mops lift up to 17 mm when the chassis is raised so rugs are vacuumed dry. The DuoDivide main brush and FlexiArm arc side brush are rated by Roborock at a 0 percent hair tangling rate, and the DuoDivide brush is certified by SGS. You can also mark a carpet as a no-go zone in the app.

The Thermo+ dock washes the mops with 176 F (80 C) hot water, which Roborock rates at 99.99 percent bacteria removal, dries them with 113 F (45 C) warm air, empties the dustbin into a bag that lasts up to 7 weeks, refills the robot's tank, and has a detachable base for rinsing. There is no cleaning solution cartridge on the CurvX, so add Roborock cleaning solution to the clean water tank yourself if you want it, and no plumbing is required.

Yes. Roborock confirms the CurvX supports both camera-based obstacle avoidance and video calling; the RGB camera with structured light recognizes 108 object types, and the app adds pet recognition, pet snaps, and remote viewing. The built-in Hello Rocky assistant is enabled by default and handles start, pause, dock, and suction or water changes even without the app, while room commands need the Roborock app. Amazon Alexa, Apple Siri, and Google Home are supported, and Matter support arrives through an over-the-air update.

The Qrevo CurvX connects to 2.4 GHz Wi-Fi only; 5 GHz is not supported, so on a dual-band router join the 2.4 GHz network by name. Amazon Alexa, Apple Siri, and Google Home are supported once the robot is linked in the Roborock app; for Alexa, enable the Roborock Plus skill, sign in with your Roborock account, and run Discover Devices. If pairing fails, check the password, allow location and local network permissions for the app, turn off any VPN or cellular data, select your home network rather than the robot's own hotspot, and avoid WEP security or special characters in the network name.

The mops are only washed if they were used, and the robot only returns for a mid-run wash when it started from the dock and the dock appears on the app map. Auto-emptying and auto-drying each have to be enabled in the app, emptying skips when the dust container cover is off, and weak emptying usually means the main brush or brush cover is not seated or the filter, air duct, or bag is blocked. The robot will not resume a paused job during Do Not Disturb (22:00 to 08:00 by default) or if you placed it on the dock by hand.

Clean the main brush every 2 weeks and replace it every 6 to 12 months; clean the side brush monthly and replace it every 3 to 6 months; rinse the washable filter every 2 weeks and replace it every 6 to 12 months; wash the mop cloths as needed and replace them every 1 to 3 months. Change the dust bag when it is full and rinse the cleaning tray, charging contacts, and sensors as needed. Use only cold water and Roborock cleaning solution in the tank, never disinfectant, and run the robot between 39 and 104 F (4 to 40 C).

Roborock says to place the dock on a hard, flat floor such as wood, tile, or concrete, flat against a wall, with at least 0.9 m (2.96 ft) of height, 0.46 m (1.51 ft) of width, and 1.2 m (3.94 ft) of depth kept clear. Obstacles near the dock are the usual reason the robot cannot return, so clear them or move the dock to an open area, and wipe the signal window on the dock and the robot's front sensor. If the robot was carried to another room, set it on the dock by hand so it can relocate itself on the map.

The robot, the Multifunctional Dock 3.0 Thermo+ with a disposable dust bag pre-installed, mop cloths with their mounts, the power cord, and the user manual. The robot weighs 9.74 lb and the dock 22.05 lb; the dock measures 17.72 x 17.72 x 17.72 inches. Roborock lists mopping noise as low as 53 dB.

Roborock covers new products such as the Qrevo CurvX with a one-year limited warranty from the purchase date against defects in materials and workmanship. Consumables such as filters, brushes, mop cloths, and dust bags are not covered, and normal wear, cosmetic damage, misuse, unauthorized repairs, and commercial use are excluded; a unit repaired or replaced under warranty stays covered for 90 days or the rest of the original term, whichever is longer. Keep your receipt, because without proof of purchase the warranty period runs from three months after the factory ship date. Warranty and technical support run through Roborock US at support-us@roborock.com or 1-855-960-4321 (24/7); RoboticsSelect is an authorized dealer, ships free within the contiguous U.S., and accepts standard returns within 30 days.