Roborock Qrevo Slim Robot Vacuum with Multifunctional Self-Cleaning Dock 3.0 (Upgraded from Qrevo Master)

The robot is 3.23 inches (8.2 cm) tall because StarSight replaces the usual spinning LiDAR turret with a solid-state LiDAR and 3D Time-of-Flight module plus an RGB camera, so it fits under sofas, beds, and cabinet toe-kicks that stop 10 cm robots. Roborock says the solid-state module has no mechanical rotation, which improves stability and frees the space on top of the robot. It still recognizes 73 obstacle types and builds a full map; the trade-off within the Qrevo line is suction, since the Qrevo Edge and Curv reach 18,500 Pa in a taller body.

Yes. The dual spinning mops lift 10 mm when the robot detects carpet, and you can also mark a rug as a no-go zone in the app if you prefer it skipped. Carpet Boost+ raises suction on rugs, and the DuoRoller Riser dual rubber brush is rated by Roborock at a 99 percent hair pick-up rate, with 11,000 Pa HyperForce suction behind it. Very dark or shag carpet can still be read as a drop by the cliff sensors, which cannot be turned off.

The dock washes the mops with 60 C (140 F) hot water, re-washes them when its dirt detection finds them still dirty, cleans its own wash tray, dries the mops with warm air, empties the dustbin into a bag that lasts up to 7 weeks, and refills the robot's water tank automatically. It also supports fast and off-peak charging and has a detachable base for rinsing. There is no cleaning solution cartridge on the Qrevo Slim, and no plumbing is needed.

Yes. The built-in Hello Rocky assistant is enabled by default and handles start, pause, return to dock, and suction or water changes on the robot itself, even without the app; room-level commands and schedules need the Roborock app. Roborock lists Matter support for the Qrevo Slim as arriving through an over-the-air update, and the robot's camera supports real-time video calls and pet recognition from the app.

The Qrevo Slim connects to 2.4 GHz Wi-Fi only; 5 GHz is not supported, so on a dual-band router join the 2.4 GHz network by name. Amazon Alexa, Apple Siri, and Google Home are supported once the robot is linked in the Roborock app; for Alexa, enable the Roborock Plus skill, sign in with your Roborock account, and run Discover Devices. If pairing fails, check the password, allow location and local network permissions for the app, turn off any VPN or cellular data, select your home network rather than the robot's own hotspot, and avoid WEP security or special characters in the network name.

The mops are only washed if they were used, and the robot only returns for a mid-run wash when it started from the dock and the dock appears on the map; if washing fails, check that the clean water tank is seated and filled and the mop modules are installed. Auto-emptying and auto-drying each have to be enabled in the app, emptying skips when the dust container cover is off, and drying ends early if the robot leaves the dock. Weak emptying usually means the main brushes or brush cover are not seated or the filter, air duct, or bag is blocked; the robot will not resume a paused job during Do Not Disturb (22:00 to 08:00 by default) or if you placed it on the dock by hand.

Clean the main brushes every 2 weeks and replace them every 6 to 12 months; clean the side brush monthly and replace it every 3 to 6 months; rinse the washable filter every 2 weeks and replace it every 6 to 12 months; wash the mop cloths as needed and replace them every 1 to 3 months. Change the dust bag when it is full, rinse the cleaning tray and charging contacts as needed, use only cold water and Roborock cleaning solution in the tank (never disinfectant), and run the robot between 39 and 104 F (4 to 40 C). A full charge takes about 4 hours.

Put the dock on a hard, flat floor such as wood, tile, or concrete, flat against a wall, with at least 0.9 m (2.9 ft) of height, 0.4 m (1.3 ft) of width, and 1.2 m (3.9 ft) of depth kept clear. Obstacles near the dock are the usual reason the robot cannot return, so clear them or move the dock to an open area, and place the robot closer if it is far away. Wipe the signal window on the dock and the robot's front sensor, and if the same error keeps appearing contact Roborock support.

The robot, the Multifunctional Dock, the dock base, one disposable dust bag, the power cable, two rotating mop modules, and the user manual. The dock measures 13.39 x 19.17 x 20.51 inches and weighs 17.64 lbs, and the robot weighs 9.04 lbs.

Roborock covers new products such as the Qrevo Slim with a one-year limited warranty from the purchase date against defects in materials and workmanship. Consumables such as filters, brushes, mop cloths, and dust bags are not covered, and normal wear, cosmetic damage, misuse, unauthorized repairs, and commercial use are excluded; a unit repaired or replaced under warranty stays covered for 90 days or the rest of the original term, whichever is longer. Keep your receipt, because without proof of purchase the warranty period runs from three months after the factory ship date. Warranty and technical support run through Roborock US at support-us@roborock.com or 1-855-960-4321 (24/7); RoboticsSelect is an authorized dealer, ships free within the contiguous U.S., and accepts standard returns within 30 days.