Roborock Saros 10R Robot Vacuum with Multifunctional Dock 4.0

Both share the 6,400 mAh battery, the DuoDivide anti-tangle brush, the AdaptiLift chassis, hot water mopping at 70 C (158 F), 80 C (176 F) hot-water mop washing, automatic mop detachment, and VertiBeam lateral sensing with cliff sensors. The 10R navigates with the StarSight Autonomous System 2.0, a dual-transmitter solid-state LiDAR plus 3D Time-of-Flight module with 21,600 sensor points, instead of the Saros 10's retractable LiDAR turret, and it mops with two rotating mop modules instead of a vibrating plate; the Saros 10 adds Bluetooth for setup. Both stand 3.14 inches (79.8 mm) tall.

Yes. The dock removes the mop mounts automatically before vacuum-only and carpet runs so nothing damp touches the rug, and when mopping it lifts the mops up to 0.87 in (22 mm) over carpet. The AdaptiLift chassis raises the body 0.39 in (10 mm) and lifts the chassis, mops, main brush, and side brush independently, so the robot crosses double-layer thresholds up to 1.57 in (4 cm). Roborock states the DuoDivide main brush is certified by SGS with a 0 percent hair entanglement rate and 100 percent hair removal rate.

No plumbing is needed. The dock empties the dustbin into a bag that lasts up to 70 days, washes the mops with 176 F (80 C) hot water that Roborock rates at 99.99 percent bacteria removal, cleans itself with 176 F hot water, dispenses detergent from a 20 oz (590 ml) reservoir, refills the robot's tank with warm water, dries the mops with 131 F (55 C) warm air for 2, 3, or 4 hours, and has fully detachable self-cleaning modules and base. You fill the clean tank, empty the dirty tank, top up detergent, and change the bag.

StarSight 2.0 maps with a solid-state LiDAR and a 3D Time-of-Flight sensor using 21,600 sensor points and recognizes 108 types of objects, while VertiBeam lateral obstacle avoidance lets the robot see and bypass objects as small as 0.79 in (2 cm) wide and tall along walls and furniture. Pet and pet-area recognition keeps it clear of animals, and the app adds pet snaps, pet search, and video calls. Keep the front sensor window clean so the ToF module can see.

Yes. The built-in Hello Rocky assistant is enabled by default and handles start, pause, dock, and suction or water changes on the robot itself, even without the app, while room commands and schedules need the Roborock app. Amazon Alexa, Apple Siri Shortcuts, and Google Home are supported, and the Matter protocol is supported for smart home integration.

The Saros 10R connects to 2.4 GHz Wi-Fi only; 5 GHz is not supported, so on a dual-band router join the 2.4 GHz network by name. Amazon Alexa, Apple Siri Shortcuts, and Google Home are supported once the robot is linked in the Roborock app; for Alexa, enable the Roborock Plus skill, sign in with your Roborock account, and run Discover Devices. If pairing fails, check the password, allow location and local network permissions for the app, turn off any VPN or cellular data, select your home network rather than the robot's own hotspot, and avoid WEP security or special characters in the network name.

The mops are only washed if they were used, and the robot only returns for a mid-run wash when it started from the dock with the dock on the map. Auto-emptying and auto-drying each have to be enabled in the app, emptying skips when the dust container cover is off, and reduced emptying usually means the main brush or brush cover is not seated. If the mop mounts are not detached for a carpet run, check that the auto-detach feature is enabled in the app; the robot will not resume a paused job during Do Not Disturb (22:00 to 08:00 by default) or if you placed it on the dock by hand.

Clean the main brush every 2 weeks and replace it every 6 to 12 months; clean the side brush monthly and replace it every 3 to 6 months; rinse the washable filter every 2 weeks and replace it every 6 to 12 months; wash the mop cloths as needed and replace them every 1 to 3 months. Change the dust bag when it is full and rinse the cleaning tray module as needed. Use only cold water in the tank and only Roborock cleaning solution in the dispenser, never disinfectant, and run the robot between 39 and 104 F (4 to 40 C).

Put the dock on a hard, level floor against a wall with at least 0.75 m (2.46 ft) of height, 0.4 m (1.31 ft) of width, and 1.2 m (3.94 ft) of depth kept clear. Roborock lists obstacles near the dock as the usual reason the robot cannot return, so clear them or move the dock to an open area, and wipe the signal window on the dock and the robot's front sensor. If the robot was carried to another room, set it on the dock by hand so it can relocate itself on the map; Roborock rates a full fast charge at about 2.5 hours.

The robot, the Multifunctional Dock, the dock base, one disposable dust bag, the power cable, two rotating mop modules, and the user manual. The robot weighs 9.04 lbs and the dock 25.13 lbs; Roborock lists noise as low as 55 dB in quiet mop-only mode.

Roborock covers new products such as the Saros 10R with a one-year limited warranty from the purchase date against defects in materials and workmanship. Consumables such as filters, brushes, mop pads, and dust bags are not covered, and normal wear, cosmetic damage, misuse, unauthorized repairs, and commercial use are excluded; a unit repaired or replaced under warranty stays covered for 90 days or the rest of the original term, whichever is longer. Keep your receipt, because without proof of purchase the warranty period runs from three months after the factory ship date. Warranty and technical support run through Roborock US at support-us@roborock.com or 1-855-960-4321 (24/7); RoboticsSelect is an authorized dealer, ships free within the contiguous U.S., and accepts standard returns within 30 days.