Robotic Kits
Exploring the Future of Desktop Robotic Arms
Desktop robotic arms put real kinematics, programming, and automation on a classroom bench or lab table. RoboticsSelect carries desktop arms and kits from WLKATA and Elephant Robotics, and their current listings show where the category is going: arms that work with cameras, conveyors, industrial controllers, and human demonstration devices. This article covers those directions, what each brand's lineup is built for, and how to plan a purchase that grows with a program.
Key takeaways
- WLKATA's three arms cover different goals: Mirobot (6+1 axis, 315 mm reach, 0.2 mm repeatability), MT4 (4+1 axis palletizer, 359 mm reach, 0.1 mm repeatability), and Haro380 (6+1 axis, 434 mm reach, plus or minus 0.05 mm repeatability).
- Elephant Robotics separates roles: the myArm M750 executes (750 mm reach, 500 g rated payload), while the myArm C650 and myController S570 capture human motion to drive it.
- Programming runs from Blockly and teach-and-play up to Python, ROS, ROS2, and MATLAB, so one arm can serve beginners and advanced students.
- The growth path is the system around the arm: vision sets, conveyors, sliding rails, AGV bases, PLC integration, and demonstration controllers.
Where are desktop robotic arms heading?
The clearest direction in the current listings is the arm as one part of a connected learning system rather than a standalone device. Four trends stand out, and each can be checked on a listing today.
Industrial protocols on the bench
The WLKATA Haro380 supports RS485, Modbus, EtherCAT, and PLC integration, and the MT4 lists USB and serial, RS485, Bluetooth, WiFi, and PLC connectivity. That lets a desktop arm join the kind of control architecture students will meet on a factory floor.
Vision and AI in the loop
The MT4 lists OpenCV, OpenMV, TensorFlow, PyTorch, and YOLOv5 among its developer platforms. WLKATA's vision products range from the OpenMV-based AI Vision Set to the Jetson-based OpenCV Advanced Vision Suite, and the Elephant Robotics ultraArm P340 pairs with a camera accessory for vision-guided sorting. That puts a see-and-act workflow within reach of a regular course.
Learning from demonstration
Elephant Robotics' myArm series supports end-to-end data training and reproduction similar to the ALOHA approach: a person moves a controller such as the myArm C650, or wears the myController S570, and an execution arm such as the myArm M750 reproduces the motion. The S570 listing describes this as capturing end-to-end motion data for training imitation-learning and other models.
Voice, gesture, and language control
The MT4 supports no-code control through a smartphone app, an AI voice box, or a large language model such as ChatGPT, and the Haro380 adds gesture control and voice commands to real-time control and manual teaching. These lower the barrier for younger students without removing the Python and ROS path.

What should a desktop arm do for your program?
Before comparing hardware, write the first task in ordinary language. "Move lightweight blocks from a marked tray into separate bins" identifies the objects, the gripping challenge, and the success criteria; "explore AI robotics" does not. Common project directions:
- Robotics fundamentals: joint movement, coordinate systems, forward and inverse kinematics, and programmed paths.
- Pick-and-place and palletizing: identical objects in fixed positions first, then varied shapes and positions.
- Vision-guided sorting: a limited recognition task, such as a few colors, with an explicit response for an unrecognized object.
- Automation prototyping: one process step with a conveyor or sliding rail before a full mini production line.
Match each exercise to the specific arm, tools, and kit contents before ordering.
WLKATA desktop arms: match the arm to the learning goal
WLKATA's desktop range has three arms, each sold in two or three kit tiers. Compare the arm first, then the kit.
| WLKATA arm | Axes | Reach | Payload | Repeatability |
|---|---|---|---|---|
| Mirobot | 6+1 | 315 mm | 250 g standard (400 g near the desktop) | 0.2 mm |
| MT4 | 4+1, palletizer layout | 359 mm | 500 g standard (600 g maximum) | 0.1 mm |
| Haro380 | 6+1 | 434 mm | 500 g rated (up to 1,000 g under specific conditions) | Plus or minus 0.05 mm |
Mirobot: six-axis kinematics for the classroom
The Mirobot has the same 6+1 axis configuration as a typical industrial robot, and WLKATA states it is used by schools and universities in more than 40 countries. The Education Kit includes a servo gripper, suction cup, pen holder, a basic conveyor belt accessory, and a student textbook with lesson plans. The Professional Kit adds a wireless Bluetooth teach pendant, a pneumatic set, and university-level textbooks, and the Advanced Kit adds a voice control module alongside the teach pendant and pneumatic set. The arm is the same in all three, so choose the tier by tools and curriculum; Applications of WLKATA Mirobot in Education covers lesson ideas.
MT4: a rebuildable palletizer
The MT4 uses a 4+1 axis palletizer layout, so the end effector always faces down, the arrangement real palletizing robots use. Its 100 percent CNC metal frame arrives fully assembled but can be taken apart and rebuilt with a hex tool, which turns mechanical design into part of the lesson. The Edu Kit includes a 200-plus page illustrated textbook and a teacher guidebook; the Advanced Kit adds the AI voice control box and a fuller tool set of two-finger and three-finger soft grippers, a soft beak gripper, a suction cup, and a pneumatic set.
Haro380: industrial behavior on a bench
The Haro380 runs harmonic reducers under closed-loop control on every joint for zero backlash. It mounts vertically, on a ceiling, or on its side, and changes end effectors automatically through a magnetic docking system. The Core Kit ships with a starter end effector; the Advanced Kit adds an extended industrial-grade end-effector set and additional educational accessories. The WLKATA comparison page sets every kit side by side.
Elephant Robotics: execution arms, controllers, and kits
The Elephant Robotics lineup is easiest to read by role: some products move objects, some capture human motion, and some combine an arm with a working scene.
myArm M750: the execution arm
The myArm M750 is a 6+1 axis arm with a 750 mm reach, a 500 g rated payload (1 kg maximum), and an included 1-DOF parallel gripper, programmed in Python and ROS. Onboard sensors track position and speed and identify anomalies to support safe operation.
myArm C650 and myController S570: capturing human motion
The myArm C650 is a hand-moved 6-DOF controller with a fingertip controller and two smart buttons; it outputs endpoint coordinates or joint angles at 50 Hz and drives the M750, among other robots. The myController S570 is a 1.5 kg wearable dual-arm exoskeleton with 12 degrees of freedom and data sampling at up to 100 Hz. The myArm C650 vs myArm M750 comparison explains how leader and follower divide the work.
Application kits
The UltraArm Conveyor Belt Kit pairs the ultraArm P340, a 4-axis arm with a 650 g payload, a 340 mm working radius, and plus or minus 0.1 mm positioning accuracy on an A5-sized footprint, with a motorized conveyor for sorting and pick-and-place lessons. The LIMO Cobot puts a myCobot 280 M5 arm on an AgileX LIMO PRO mobile base for mobile grasping, and the Portable AI Educational WorkStation runs Ubuntu with ROS1 and ROS2 and works with six arm options. The Elephant Robotics arm comparison lays out the lineup.

How do you choose a desktop arm that can grow with you?
Within WLKATA, pick the arm before the kit tier; within Elephant Robotics, decide whether the purchase is an execution arm, a controller, or an application kit. Then work through the task itself:
- Describe the object and movement: size, weight, material, start position, destination, and the approach and release.
- Check payload and reach for the exact model, using the rated figure rather than the maximum.
- Confirm the tool: which gripper or suction tool the task needs and whether the kit includes it.
- Verify the software path: the interface beginners will use first and the language or framework advanced students will move to.
- Plan the workspace: the base, object positions, cable runs, and any conveyor, rail, or camera stand.
- Define a measurable result: what counts as a successful cycle and which failures to log.
Before you buy
Start from the first semester's lessons, not the most impressive demonstration. Check what each kit tier includes (end effectors, teach pendant, voice module, textbooks), list the add-ons a second year will need, and make sure the bench has room for the arm's full reach plus any conveyor or camera stand.
Warranty, shipping, and support
WLKATA arms are covered by the WLKATA Product Warranty Policy, provided by Wristline Inc. (WLKATA) or its authorized agents: 1 year on the robotic arm, 3 months, 6 months, or 1 year on spare parts depending on the part, and consumables excluded. Elephant Robotics products are covered by the Elephant Robotics After-Sales Warranty Policy: 365 days each on the mechanical structure, power supply system, and control system from the date of receipt. Both require a valid proof of purchase.
RoboticsSelect is an authorized dealer for both brands, so warranty and repair requests go through our support team, which coordinates with the manufacturer. Shipping is free to the contiguous 48 U.S. states; we do not ship to PO boxes, Alaska, Hawaii, Puerto Rico, or outside the U.S. Unopened, unused units can be returned within 30 days under the refund policy. Our U.S.-based, product-trained team is at support@roboticsselect.com or (412) 415-7375.
The takeaway
Desktop robotic arms are becoming the center of small connected systems: an arm plus vision, conveyors, industrial protocols, or a demonstration controller. Pick the arm that fits the first task, choose the kit tier by the tools and curriculum it includes, and confirm the expansion path before ordering. Every WLKATA and Elephant Robotics arm RoboticsSelect carries is in the desktop robotic arms and kits collection.
Products in this article
Wlkata Mirobot Education Kit - 6 Axis Robotic Arm -Ros & Matlab Simulation Teaching
$1,680.00
View product
WLKATA MT4 Edu Kit - 0.1mm Repeatability Metal 4 Axis Robotic Arm, ROS2 Arduino Rebuildable
$1,380.00
View product
WLKATA Haro380 Core Kit | 6-Axis Industrial Grade, PLC ROS2 MATLAB Voice Control
Sold out
View product
Elephant Robotics myArm M750
$1,999.00
View product
FAQ
Which WLKATA arm should a school start with?
The Mirobot Education Kit is the classroom starting point: a 6+1 axis arm with 315 mm reach and 0.2 mm repeatability, a servo gripper, suction cup, and pen holder, and a student textbook with lesson plans. The MT4 suits programs focused on palletizing and mechanics, and the Haro380 suits industrial automation training.
What is the difference between the myArm M750 and the myArm C650?
The M750 is the execution arm, with a 750 mm reach, a 500 g rated payload, and an included parallel gripper. The C650 is a hand-moved controller that outputs joint angles or endpoint coordinates at 50 Hz to drive an arm such as the M750; it is not a payload-bearing arm.
Which desktop arms support ROS?
The WLKATA Mirobot and MT4 list ROS and ROS2, and the Haro380 lists ROS2. The Elephant Robotics myArm M750 and C650 run in Python and ROS, and the UltraArm Conveyor Belt Kit offers ROS1 and ROS2 simulation.
Can these arms work with vision systems and conveyors?
Yes. The MT4 lists an AI Vision camera tool, conveyor system, sliding rails, and an AGV rover base, and the Haro380 lists the AI Vision Set, conveyor belt, sliding rail, and PLC learning station. The Elephant Robotics UltraArm Conveyor Belt Kit pairs the ultraArm P340 with a motorized conveyor.
What warranty do desktop arms carry at RoboticsSelect?
WLKATA arms carry a 1-year warranty under the WLKATA Product Warranty Policy, and Elephant Robotics products carry 365 days on the mechanical structure, power supply system, and control system. RoboticsSelect is an authorized dealer for both brands and handles warranty support through our support team.